If water entered the house from a storm, a roof breach or a flooded canal, check walls, cabinets and flooring even where it looks dry. Hidden moisture is what lets growth spread behind the surface. Call the number on this page to be connected with a local mold company in Hobe Sound.

Hidden growth behind a dried-out wall
A wall can look fine on the surface while the cavity behind it stays wet. Water wicks upward through drywall and insulation, so growth often starts well above the visible waterline. A moisture reading and a look inside the wall tell you more than the paint does. Rooms that smell damp but look clean deserve the same attention.
Why the power outage matters
When the grid goes down the AC stops, and a closed block house heats up and holds humidity. Wet materials that would dry in a day with the system running can stay damp for far longer. An outage can turn a small leak into a much bigger drying problem.
Close to the Intracoastal and the ocean, Hobe Sound homes face surge, salt air and wind-driven rain, and coastal water leaves salt and silt behind on block, stucco and flooring.

Why speed changes the bill
EPA guidance is to dry wet materials within 24 to 48 hours. Past that window, more material often has to come out instead of being dried in place. Calling early tends to keep the demolition smaller, which also keeps the rebuild smaller.
What stays and what goes
Hard, nonporous items such as tile and some solid wood can often be cleaned and dried. Carpet pad, insulation, soaked drywall and particleboard usually cannot be saved. The company should explain each call and let you photograph anything before it is hauled away.
Do not seal wet walls
Painting over damp drywall, laying new flooring on a wet slab or closing a flood-cut wall too soon traps moisture. That moisture feeds growth where nobody can see it. Wait for dry readings, not a dry feel, before covering anything. Patience here avoids paying twice.
Local details for Hobe Sound
Florida requires mold assessors and mold remediators to hold a state license through the Department of Business and Professional Regulation (DBPR). Ask for the license number and look it up before anyone starts.
Florida also bars a company that assessed a structure from remediating it within 12 months, and the reverse, so the inspection and the cleanup usually come from two different businesses.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the Martin County Building Department.
Flood zone and floodplain information for the area is available through the Martin County Building Department, which helps when you're sorting out insurance or rebuilding after water got in.
Companies that take calls here usually also work in Jupiter, Tequesta and Stuart.
Hurricane & Flood Mold Removal questions in Hobe Sound
What is a flood cut?
Does bleach kill flood mold?
How long does flood drying take?
Do salt air and surge water change the cleanup?
More mold services in Hobe Sound
Hurricane & Flood Mold Removal nearby
Helpful guides
Sources
Last updated: