Ducts in a hot attic carry cold air, so the outer surface can sweat and soak insulation and ceilings. That kind of ongoing dampness is a common reason AC mold returns. Call the number on this page to be connected with a local mold company in Hobe Sound.

The smell test
A sour, earthy or dirty-sock odor from the vents that comes and goes with the AC is a classic sign. It often shows up on the first cooling cycle after the house has sat idle. A smell alone does not prove mold, but paired with moisture near the unit it justifies an inspection.
Oversized systems and short cycling
An oversized AC cools the air fast, shuts off, and never runs long enough to pull humidity out. The house feels cool and clammy, and coils and ducts stay damp. If a home never feels dry even with the AC running, the system itself may be part of the cause.
Coastal humidity in Hobe Sound means the AC rarely gets a break, and wind-driven rain can wet attic ducts and registers during storms.

Factors that move the quote
- Number of air handlers and zones
- Length and type of ductwork, metal or flex
- Whether insulation or duct sections must be replaced
- Condition of the coil, pan and blower
- Whether drywall around the unit is wet
Turn the system off
EPA advises against running an HVAC system that is contaminated with mold, since air can carry spores to other rooms. If growth shows on or inside the unit, switch it off at the thermostat and call a company before restarting it.
Humidity targets
EPA advises keeping indoor humidity below about 60 percent, ideally between 30 and 50 percent. Set the thermostat fan to auto so the coil can drain between cycles, and use a hygrometer to see how the house is doing. If it runs high, ask an AC contractor about dehumidification.
Who handles what in Hobe Sound
State law treats mold assessment and mold remediation as separate license types issued by DBPR. A quick license lookup is worth doing before you sign anything.
Under Florida's 12-month rule, the company that tests or assesses a home generally can't be the one hired to remediate it, which keeps the scope honest.
If the job grows into replacing drywall, cabinets or framing, ask whether the rebuild needs a permit from the Martin County Building Department.
Flood zone and floodplain information for the area is available through the Martin County Building Department, which helps when you're sorting out insurance or rebuilding after water got in.
Companies that take calls here usually also work in Jupiter, Tequesta and Stuart.
AC & Duct Mold Removal questions in Hobe Sound
Why do my vents have black spots?
What is the condensate line and why does it matter?
Can metal ducts be cleaned and flex duct replaced?
Do I need mold testing for the AC?
More mold services in Hobe Sound
AC & Duct Mold Removal nearby
Helpful guides
Sources
Last updated: